中文版|English

WELCOME TO FOSHAN YUANLI PRECISION MACHINERY CO.,LTD
TEL:13827748026

FOSHAN YUANLI PRECISION MACHINERY CO.,LTD

YUANLI PRECISION MACHINERY CO.,LTD—— DEVOTION MAKES PROFESSION ——                        

China's leading brand water jet cutting equipment

CONTACT US

FOSHAN YUANLI PRECISION MACHINERY CO.,LTD
FREE TEL:13827748026
TEL:0757-63856189
FAX:0757-63858669
E-MAIL:fsyuanli@hotmail.com
URL:http://en.fsyuanli.net/
ADD: No.3 Xingfa Road,Luocun Xiabai The Third Industrial Zone,Nanhai District Foshan Guangdong China

Company News POSITION:  HOME   >   NEWS>Company News  

Water safety regulations

Data Source:Foshan Yuanli Precision machinery Co. , LTD Time:2015-11-26

NO

explain

Icon

区分

NO

 

 

 

 

 

 

图示

 

 

 

 

 

 

 

Note before class

1

Check the water, electricity, gas, electricity and gas supply of water, electricity and gas before starting the machine.

 

班中注意事项

9


在进行取料、换喷嘴的过程中一定要先将高压水开关、或高压关闭,等残留的高压水卸除后再行操作。

 

2

Check the water jet range has no obstacle.

 

10

在使用水刀切割时,应根据不同材料选择不同的压力进行操作。

 

3

Operators need to have the relevant knowledge, not to prohibit the operation of the operator.

 

11

在使用水刀的过程中,要注意水刀的增压器和高压管工作密封情况。

 

4

The operator needs to be standardized dress, wear protective gloves and goggles.

12

在紧急停电时,高压水会残留在高压系统里,一旦来电,残留的高压水会喷出,因此,这时候也不要靠近切割头.重新接通电源后,需将残留的高压水卸除。

 

Note in class

1

In the process of cutting the workpiece, the operator and the personnel should not be independent of the white, to maintain a certain distance.

13


使用行车吊运工件的过程中应注意碰撞设备。

 

2

The workpiece cutting is smaller, lighter, should take measures to prevent cutting fixed, take place in the process.

 

11

水刀加工好的工件边缘都十分锋利,因此应高度注意被划伤割伤。

3

To ensure that the workpiece has been placed flat, to avoid damage to the cutting sand pipe, resulting in the occurrence of safety accidents.

班后注意事项

1


及时清理切割后余留的边角料,并摆放好加工完毕的工件。

4

As found in the cutting process, the workpiece is the impact of change, it is forbidden to use other objects to correct.

 

2

切断电源,关闭高压系统开关。

 

distinguish

NO

 

 

 

 

 

 

Icon

 

 

 

 

 

 

Note in class

9


In reclaimer, changing a nozzle must first high-pressure water switch, a high pressure closed, the residue of high-pressure water, a removable after operation.

 

10

In the use of water jet cutting, according to the different materials to choose different operation pressure.

 

11

In the process of using water jet, should pay attention to water jet supercharger and high-pressure pipe seal work.

 

12

At the time of power failure emergency, high pressure water will remain in the high-pressure system, once calls, residual pressure water spewed out. Therefore, at this time also do not close to the cutting head. Re after the power is switched on, the residual high-pressure water removable.

 

13


Collision equipment should be paid attention to in the process of using the crane to carry on the work piece.

 

11

Water jet machining good workpiece edge is very sharp, so should pay high attention to be scratched cut.

Note after class

1


Clean up the leftover material remaining after cutting in a timely manner, and put the workpiece processed.

2

Cut off the power supply, switch off the high voltage system.

 

 


CONTACT US

Free Call

13827748026

FAX

0757-63858669

EMAIL

fsyuanli@hotmail.com

ADD

No.3 Xingfa Road,Luocun Xiabai The Third Industrial Zone,Nanhai District Foshan Guangdong China

-
QQ

Online Service

  • QQ:QQ
  • 扫一扫